quantumalloys.com
 

 QUANTUM ALLOYS UK

Contact sales

Tel. 44(0)1494 484844 Fax. 44(0)1494 482155

Home

quantumalloys.com

Request for Quotation

Part Number

Austenitic Stainless Steel

Chemical Composition Limits

Weight %  C Cr Ni S Si Mn P Fe

 CHRONIFER

SUPRA

0.07 Max 17.00-19.50 8.50-10.50 0.03 Max 1.00 Max 2.00 Max 0.045 Max Rem

Other Chemically similar Specifications 

Weight %  C Cr Ni S Si Mn P Fe
WS 1.4301 0.07 Max 17.00-19.50 8.50-10.50 0.03 Max 1.00 Max 2.00 Max 0.045 Max Rem
DIN X 5 CrNi 1810 0.07 Max 17.00-19.50 8.50-10.50 0.03 Max 1.00 Max 2.00 Max 0.045 Max Rem
AISI 304 0.07 Max 17.00-19.50 8.50-10.50 0.03 Max 1.00 Max 2.00 Max 0.045 Max Rem
AFNOR Z6 CN 18.09 0.07 Max 17.00-19.50 8.50-10.50 0.03 Max 1.00 Max 2.00 Max 0.045 Max Rem

Chronifer Supra material is Manufactured in Rod, Bar and coil

AISI 304 Stainless Steel

 

Corrosion Resistance

It resists rusting, from all atmospheric sources and is recommended for use in connection with foodstuff, sterilizing, most of organic chemicals and dyestuff.  For best results it is recommended that the surface of parts is polished and free from scale, foreign particles.  This is accomplished with passivating.

 

 

Surface Execution

Ø< 2.00mm: cold drawn, polished

Ø>= 2.00mm: cold drawn, ground polished with surface roughness N5

Standard in bars of 3m lengths =/- 50mm

In coils for Escomatic machines (approx 35kg/coil)

 

 

Tolerances

Standard ISO h7 (special sizes and tolerance are in short time available)

 

 

Heat Treatment

For high corrosion resistance and low magnetism, there may be an annealing procedure necessary.  This annealing is only useful after a strong cold working which raised the mechanical resistant

Annealing:  Heat to 1010-1120ºC (1850-2050ºF)

Hardening: Cannot be hardened by heat treatment

 

 

Mechanical Properties

Tensile strength at delivery form 720-950 N/mm2

Tensile strength after annealing 540-750 N/mm2

 

 

Welding

Very good for welding, brazing resistance seam welding  and others

 

 

Cutting Rate

20-30m/min (approx value, depending on the lubrication oil, the cutting tools., the form of parts.

 

 

Stock Range

Ø 1.00 to 13.00 mm round full material in stock, other dimension on request

 

 

 

Disclaimer

Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.

Site © 2005 Quantum Alloys UK

Group Companies aircraftmaterials.com Ltd