|
Request
for Quotation
RETURN TO WELDING HOME PAGE Welding
Alloy AMS 5679
|
Chemical Composition
|
| % |
Ni+Co |
Cr |
Fe |
Cb |
C |
Si |
S |
Mn |
Cu |
Co
|
|
AMS
5679
|
70.00 min
|
14.0-17.0
|
6.0-10.0
|
1.5-3.0
|
0.08 max
|
0.35 max
|
0.015 max
|
1.0 max
|
0.50 max
|
1.00 max
|
|
Used on |
AMS 5540, 5580, 5665. (Alloy IN 600 variants).
ASTM B163, 166, 167, 168.
ASME SB 516, 517, 564.
MIL-N-23229
Turbine engine exhaust components. Use argon gas shielding and ultra clean conditions for welding.
|
|
Cross-Reference of Specifications |
MSRR 9500/206
AMS 5679
FM 62
UNS N06062
73Ni 15.5Cr 2.2Cb 8.0Fe
AWS A5.14 Er Ni Cr Fe-5
MIL-R-5031-8A
MIL-E-21562 Type RN62, EN62
OMAT 3/218
|
|
Availability
Ex stock MIG
spools and TIG rods
|
|
|
Weld Properties |
Annealed deposit: HB 89, Density: 8.45 gm/cc
FM 62 is a single phase Ni-Cr-Fe alloy containing Cb to offset hot cracking in thick section joints.
|
Disclaimer
Every effort is made to ensure that
technical specifications are accurate. However, technical specifications
included herein should be used as a guideline only. All specifications are
subject to change without notice.
|
