|
Request
for Quotation
RETURN TO WELDING HOME PAGE Welding
Alloy AMS 5786
|
Chemical Composition
|
| % |
Ni |
Mo |
Cr |
Fe |
C |
Mn |
S |
P |
C0 |
V
|
|
AMS
5786
|
Bal
|
23.0- 26.0
|
4.0- 6.0
|
4.0- 7.0
|
0.12 max
|
1.0 max
|
0.03 max
|
0.04 max
|
2.50 max
|
0.60 max
|
|
Used on |
AMS 5786 is used to join dissimilar metal combinations including A286 (AMS 6532), L-605(AMS 5796). It is used for combustor repair and manufacture for welding turbine blades to rotor hubs. shroud rings, etc.
Used to repair difficult-to-weld alloys.
AMS 5755 : RPS 184 Group 5 and 63
Use pure argon gas shielding and ultra clean conditions. |
|
Cross-Reference of Specifications |
MSRR 9500/213
AMS 5786
Alloy W
62.5Ni 5.0Cr 24.5Mo 5.5Fe
OMAT 333A
(Commercial Grade AWS A5.14 ER Ni Mo-3).
|
|
Availability
Ex stock MIG
spools and TIG rods
|
|
|
Weld Properties |
Tensile strength: 127ksi, Density 9.03 gm/cc
A single phase Ni-Mo high temperature alloy.
|
Disclaimer
Every effort is made to ensure that
technical specifications are accurate. However, technical specifications
included herein should be used as a guideline only. All specifications are
subject to change without notice.
|
