2014 A aluminium alloy

QUANTUM ALLOYS UK

Tel. 44(0)1494 484844 Fax. 44(0)1494 482155

Request for Quotation

Aluminium Alloy 2014 A

Data Sheet

Chemical Composition Limits Aluminum 2014 A Alloy
Weight %	Si	Fe	Cu	Mn	Cr	Mg	Ni	Zn	Ti+Zr	Al
2014 A	0.50-0.90	0.50 max	3.9-5.0	0.4-1.2	0.10	0.2-0.8	0.1 max	0.25 max	0.20 max	Bal

Aluminium Alloy 2014 A

Available in: Bar, Sheet, Strip, Plate, Tube, Extrusion, Sections, Wire.

Related Specifications:

7L37 Aluminium 2014A Rivet Stock

3L63 Aluminium 2014 A Tube

2L77 Aluminium 2014 A Forging Stock T6 Temper

2L87 Aluminium 2014 A Bars and Sections T6 Temper

2L93 Aluminium 2014 A Plate

L102 Aluminium 2014 A Bars and Sections T4 Temper

L103 Aluminium 2014 A Forging Stock T4 Temper

L105 Aluminium 2014 A Tube T4 Temper

L156 Aluminium 2014 A Sheet and Strip T4 Temper

L157 Aluminium 2014 A Sheet and Strip T6 Temper

L158 Aluminium 2014 A Sheet and Strip T4 Temper Close Tolerance.

L159 Aluminium 2014 A Sheet and Strip T6 Temper Close Tolerance.

L163 Aluminium 2014 A Clad Sheet and Strip T3 Temper

L163 Aluminium 2014 A Clad Sheet and Strip T4 Temper

L165 Aluminium 2014 A Clad Sheet and Strip T6 Temper

L166 Aluminium 2014 A Clad Sheet and Strip T4 Temper Close Tolerance.

L167 Aluminium 2014 A Clad Sheet and Strip T6 Temper close Tolerance.

L168 Aluminium 2014 A Bars , Rod and Sections T6, T6510 and T6511

Aluminium 2014 A H15, Sheet HS15, Plate HP15, Tube HT15, Extrusion HE15.

3.1255 AlCu4SiMg

AMS 4029 Aluminium 2014 Alloy Sheet and Plate (2014; -T6 Sheet, -T651 Plate)

Solution and Precipitation Heat Treated

AMS 4121 Aluminium 2014 Alloy Bars, Rods, and Wire, Rolled or Cold Finished, 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6), Solution and Precipitation Heat Treated

AMS 4153 Aluminium 2014 Alloy, Extrusions 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution and Precipitation Heat Treated

A-U4SG

QQ-A-200/2

QQ-A-225/4

QQ-A-250/3

The corrosion resistance of this aluminium alloy 2014 is particularly poor.

To combat this, sheet products are clad with a thin layer of pure aluminum.

If unclad 2014 aluminium is to be exposed to the elements, it should be protected by painting or other surface finishing.

Disclaimer

Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.

Group Companies AircraftMaterialsUK.com