quantumalloys.com
 

 QUANTUM ALLOYS UK

E-mail sales@quantumalloys.com

Tel. 44(0)1494 484844 Fax. 44(0)1494 482155

Home

quantumalloys.com
 
 
 

Request for Quotation


ALLOY 625 | ALLOY 718 | ALLOY X750 | SHEET | COIL/FOIL | ROD | PRODUCTS

Nickel 600

NOMINAL DATA SHEET

CHEMICAL COMPOSITION

TYPICAL APPLICATIONS

C - .15max Ti - .50max Furnace Muffles
Mn - 1.00max Cb+Ta - 1.0max Electronic and Electrical Components
S - .015max Co - 1.0max Jet Engine Parts
Si - .50max   Springs
Cr - 14/17   Chemical and Food
Ni - 72.0   Processing Equipment
Cu - .50max   Bellows
Fe - 6/10    
Al - .35max    
 

Top of Page

PHYSICAL PROPERTIES (ANNEALED CONDITION)
Modulus of Elasticity, Tension 10(******)psi - 31.0
Magnetic permeability at 200H(At 70 F) - 1.010
Electrical Resistivity, Microhm-cm(At 70 F) - 103
Density, lb/cu.in. - .304
Coefficient of Thermal Expansion, in./in./ F x 10(-******)
70 - 200 F ............................ 7.4
70 - 400 F ............................ 7.7
70 - 800 F ............................ 8.1
70 - 1000 F ........................... 8.4
 
 

 

NOMINAL MECHANICAL PROPERTIES (ANNEALED CONDITION)
Ultimate Tensile Strength, psi - 90,000
0.2% Offset Yield Strength, psi - 31,000
Elongation in 2 inches percent - 40
Hardness, Rockwell - B65
 

  


Top of Page

Alloy 625

NOMINAL DATA SHEET

ALLOY 625

CHEMICAL COMPOSITION

ALLOY 625

TYPICAL APPLICATIONS

Cu - .10max Al - .40max Ducting Systems
Mn - .50max Ti - .40max Springs
P - 0.15max Cb+Ta - 3.15/4.15 Fuel Nozzles
S - 0.15max Co - 1.0max Jet Engine Parts
Si - .50max   Honeycomb
Cr - 20/23    
Ni - Balance    
Mo - 8/10    
Fe - 5.0max    
 

 

PHYSICAL PROPERTIES (ANNEALED CONDITION)
Modulus of Elasticity, Tension 10(******)psi - 30.0
Magnetic permeability at 200H(At 70 F) - 1.001
Electrical Resistivity, Microhm-cm (At 70 F) - 129
Density, lb/cu.in. - .305
Coefficient of Thermal Expansion, in./in./ F x 10(-******)
70 - 200 F ............................ 7.1
70 - 400 F ............................ 7.3
70 - 800 F ............................ 7.6
70 - 1000 F ........................... 7.8
 
 

 

NOMINAL MECHANICAL PROPERTIES (ANNEALED CONDITION)
Ultimate Tensile Strength, psi - 130,000
0.2% Offset Yield Strength, psi - 68,000
Elongation in 2 inches percent - 42
Hardness, Rockwell - B65
 

Top of Page

Alloy 718


NOMINAL DATA SHEET

CHEMICAL COMPOSITION
TYPICAL APPLICATIONS
C - .08max Fe - Balance Jet Engine Parts
Mn - .35max Al - .20/.80 Pump Parts
P - .015max Ti - .65/1.15 Rocket Motors Casings
S - .015max Cb+Ta - 4.75/5.50 Aerospace Components
Si - .35max Co - 1.0max Nuclear Reactor Fuel
Cr - 17/21 B - .006max Support Grids
Ni - 50/55    
Mo - 2.8/3.3    
Cu - .30    
 

Top of Page

PHYSICAL PROPERTIES (ANNEALED CONDITION) **
Modulus of Elasitcity, Tension 10(******) psi - 29.0
Magnetic permeability at 200H(At 70 F) - 1.001
Electrical Resistivity, Microhm-cm(At 70 F) - 121
Density, lb/cu.in. - .296
Coefficient of Thermal Expansion, in./in./ F x 10(-******)
70 - 200 F ............................ 7.2
70 - 400 F ............................ 7.8
70 - 800 F ............................ 8.1
70 - 1000 F ........................... 8.2
** (Aged)
 

 

NOMINAL MECHANICAL PROPERTIES (ANNEALED CONDITION)
Ultimate Tensile Strength, psi - 130,000
0.2% Offset Yield Strength, psi - 67,000
Elongation in 2 inches percent - 41
Hardness, Rockwell - B90
 

 


Top of Page

Alloy X750

NOMINAL DATA SHEET

CHEMICAL COMPOSITION
TYPICAL APPLICATIONS
C - .08max Al - .4/1.0max Vacuum Envelopes
Mn - .35max Ti - 2.25/2.75max Bellows
P - .015max Cb+Ta - .7/1.2 Aircraft Sheet
S - .015max Co - 1.0max Steam Service
Si - .35max   Springs
Cr - 14/17    
Ni - 70.0    
Cu - .50max    
Fe - 5/9    
 

 

PHYSICAL PROPERTIES (ANNEALED CONDITION) **
Modulus of Elasitcity, Tension 10(******)psi - 31.0
Magnetic permeability at 200H(At 70 F) - 1.0035
Electrical Resistivity, Microhm-cm (At 70 F) - 122
Density, lb/cu.in. - .298
Coefficient of Thermal Expansion, in./in./ F x 10(-******)
70 - 200 F ............................ 7.0
70 - 400 F ............................ 7.1
70 - 800 F ............................ 7.8
70 - 1000 F ........................... 8.1
** (Aged)
 

Top of Page

NOMINAL MECHANICAL PROPERTIES (ANNEALED CONDITION)
Ultimate Tensile Strength, psi - 112,000
0.2% Offset Yield Strength, psi -46,000
Elongation in 2 inches percent - 45
Hardness, Rockwell - B80
 

NICKELS 600/601/625/718/750

SHEET COIL/FOIL ROD
.050
.062
.078
.109
.125
.140
.250
.375
.500
.750
1.00
.003
.004
.005
.010
.015
.020
.030
.040
.050
.062
.125
.250
.312
.437
.500
.625
.750
.875
1.00
1.25
1.50
1.75
2.00
2.25
2.50
3.00
3.50
4.00
5.00
5.50
6.00


*NOTE: Other sizes available upon request.

Top of Page

Disclaimer    

Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.

 
 

Site © 2005 Quantum Alloys UK UK

Group Companies AircraftMaterialsUK.com